Shop headings: New Spares | Used Spares | Accessories | Brands
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
4 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT
Polished adjustable aluminium brake lever for PS 11, PS 13 and PS 16 master cylinders
Also known as Guzzi ref. 10270652. See HAA10850 for lever pivot pin and BRA01630 for span adjustable alternative lever
1 in stock
30605680-z 30605680 GU30605680 30 60 56 80
3060 5680 3060.5680 30.60.56.80
£29.00
INC VAT
£24.17 EX VAT
Fork bush
Sorry, this part is no longer available.
30530515 GU30530515 30 53 05 15
3053 0515 3053.0515 30.53.05.15
Sorry this item is out of production
10 spline connection sleeve to connect drive box to driveshaft
1 in stock
12327700-z 12327700 GU12327700 12 32 77 00
1232 7700 1232.7700 12.32.77.00
£28.20
INC VAT
£23.50 EX VAT
Full seal kit and gasket set for overhauling the rear drive box
Bearings available separately
More than 5 in stock
£28.00
INC VAT
£23.33 EX VAT
Con rod bearing shell
4 required per engine. Also known as Guzzi ref. 12062000, 12062005, 28062050 Hole pattern may vary from the original part
4 in stock
30062000 GU30062000 30 06 20 00
3006 2000 3006.2000 30.06.20.00
£28.00
INC VAT
£23.33 EX VAT
Steel intermediate clutch plate
1 in stock
12082300-z 12082300 GU12082300 12 08 23 00
1208 2300 1208.2300 12.08.23.00
£28.00
INC VAT
£23.33 EX VAT
Adjustable front black brake lever for PS 11, PS 13 and PS 16 rectangular master cylinder.
Also known as Guzzi ref. 28605678. See BRA01630 or BRA01640 for a span adjustable alternative and HAA10850 for lever pivot pin
This part is due back in stock soon, call 01484 841395 to reserve yours
10270640-z 10270640 GU10270640 10 27 06 40
1027 0640 1027.0640 10.27.06.40
£28.00
INC VAT
£23.33 EX VAT
Kit containing two replacement 60cm silicon HT leads, lead ends and 90° plug caps. The leads are suppied as a single double length lead so you can cut it into two leads of the exact required length. Includes crimp on lead ends for standard big twin 12v round coils
Suitable for most models with coils under the tank where the HT lead is not moulded into the ignition coil. We recommend checking what type of plug cap you have and measuring your existing cable run to check this part will fit
This part is due back in stock soon, call 01484 841395 to reserve yours
£28.00
INC VAT
£23.33 EX VAT
Con rod bearing shell 1st oversize -0.254MM
This part is available by special order, request a quote
30062001 GU30062001 30 06 20 01
3006 2001 3006.2001 30.06.20.01
£28.00
INC VAT
£23.33 EX VAT